豪沃高分子量聚耐冲击异形件

 山东豪沃橡塑**高分子量聚耐冲击异形件可定制

  **高分子量聚异形件**优异特性：

1、性高居各类纯塑料，而且随分子量的增大而提高;UHMWPE与钢、铜配对时容易产生粘着磨损，对配偶件的磨损小。使用寿命**钢质，性是炭钢及不锈钢的3～7倍;

2、自润滑性很好，滚动摩擦系数在塑料中较低，可以在无润滑下以滑动或转动的形式工作，其润滑性比钢和铜在有润滑油的情况下还要好!

3、具有很强的吸收冲击能和摩擦消音的性能，有摩擦噪声小的优点;

4、冲击强度列塑料，是现有塑料品种中较耐冲击的一种，常温冲击强度可与聚碳酸酯PC媲美，而低温冲击强度甚至比聚碳酸酯PC还要好;其冲击强度是ABS的8倍、PA66的10倍、POM的22倍、PBT的25倍!

5、耐疲劳性很好，耐疲劳强度大于50万次;

6、分子量较大，但不饱和键很少，因此具有优良的耐化学腐蚀性，能耐各类腐蚀性介质，比如：酸、碱、盐，也能耐各类**溶剂;

7、耐环境应力开裂的性能很好，是普通的200倍，抗应力开裂时间高达4000小时;而且耐高温蠕变性也非常好;UHMWPE的耐辐射性亦很好;

8、**耐热性不高，热变形温度HD

9、电气性能良好，较佳的电绝缘性和抗静电性，体积电阻率>1015Ω.cm，介电强度为90kV/mm，介电常数2.3;

10、表面无吸附力，对任何材料都没有粘结性，具有较低的吸水率(<0.01%);

11、具有良好的抗高能辐射性;

12、无毒、无味、无渗出物;

13、耐老化优异的抗老化性能，在自然日照条件下，**高分子量聚的老化寿命为50年;

14、具有优异的机械加工性能。

  山东豪沃橡塑有限公司主要生产加工高分子聚板、租赁铺路垫板、高分子量支腿垫板、冰球场围栏、**高分子量聚刮板、**高分子量聚链条导轨等**高分子量聚产品，欢迎各位老板前来询价咨询

Shandong Haowo Rubber & Plastic Ultra-high Molecular Weight Polyethylene Impact Resistant Profiles can be customized.

Ultra-high molecular weight polyethylene special-shaped parts have outstanding characteristics; 1. The wear resistance is higher than that of all kinds of pure plastics, and it increases with the increase of molecular weight; When UHMWPE is paired with steel and copper, it is easy to produce adhesive wear, and the wear on the mating parts is small. Its service life is longer than that of steel, and its wear resistance is 3-7 times that of carbon steel and stainless steel. 2. The self-lubricating property is very good, the rolling friction coefficient is low in plastics, and it can work in the form of sliding or rotating without lubrication. Its lubricity is even better than that of steel and copper with lubricating oil! 3. It has strong impact energy absorption and friction silencing performance, and has the advantage of low friction noise; 4. Impact strength plastic is one of the existing plastic varieties with high impact resistance. The impact strength at normal temperature is comparable to that of polycarbonate PC, and the impact strength at low temperature is even better than that of polycarbonate PC. Its impact strength is 8 times of ABS, 10 times of PA66, 22 times of POM and 25 times of PBT! 5. The fatigue resistance is very good, and the fatigue strength is more than 500,000 times; 6. The molecular weight is large, but there are few unsaturated bonds, so it has excellent chemical resistance, and can withstand various corrosive media, such as acid, alkali, salt, and various organic solvents; 7. The environmental stress cracking resistance is very good, 200 times that of ordinary ethylene, and the stress cracking resistance time is as high as 4,000 hours; But also the high temperature creep resistance is very good; The radiation resistance of UHMWPE is also very good; 8, super heat resistance is not high, the thermal deformation temperature HD 9. Good electrical performance, good electrical insulation and antistatic property, volume resistivity > 1015Ω.cm, dielectric strength of 90kV/mm and dielectric constant of 2.3; 10. The surface has no adsorption force, no adhesion to any material, and low water absorption (< 0.01%); 1. Good resistance to high-energy radiation; 12, non-toxic, tasteless, no exudate; 13. Excellent anti-aging performance. Under natural sunlight, the aging life of UHMWPE is 50 years; 14. Excellent machinability.Shandong Haowo Rubber & Plastic Co., Ltd. mainly produces and processes ultra-high molecular weight polyethylene products such as high molecular weight polyethylene boards, leased paving pads, high molecular weight leg pads, ice rink fences, ultra-high molecular weight polyethylene wear-resistant scrapers, ultra-high molecular weight polyethylene chain guide rails, etc. Welcome all bosses to inquire.

Ultra-high molecular weight polyethylene special-shaped parts have outstanding characteristics; 1. The wear resistance is higher than that of all kinds of pure plastics, and it increases with the increase of molecular weight; When UHMWPE is paired with steel and copper, it is easy to produce adhesive wear, and the wear on the mating parts is small. Its service life is longer than that of steel, and its wear resistance is 3-7 times that of carbon steel and stainless steel. 2. The self-lubricating property is very good, the rolling friction coefficient is low in plastics, and it can work in the form of sliding or rotating without lubrication. Its lubricity is even better than that of steel and copper with lubricating oil! 3. It has strong impact energy absorption and friction silencing performance, and has the advantage of low friction noise; 4. Impact strength plastic is one of the existing plastic varieties with high impact resistance. The impact strength at normal temperature is comparable to that of polycarbonate PC, and the impact strength at low temperature is even better than that of polycarbonate PC. Its impact strength is 8 times of ABS, 10 times of PA66, 22 times of POM and 25 times of PBT! 5. The fatigue resistance is very good, and the fatigue strength is more than 500,000 times; 6. The molecular weight is large, but there are few unsaturated bonds, so it has excellent chemical resistance, and can withstand various corrosive media, such as acid, alkali, salt, and various organic solvents; 7. The environmental stress cracking resistance is very good, 200 times that of ordinary ethylene, and the stress cracking resistance time is as high as 4,000 hours; But also the high temperature creep resistance is very good; The radiation resistance of UHMWPE is also very good; 8, super heat resistance is not high, the thermal deformation temperature HD 9. Good electrical performance, good electrical insulation and antistatic property, volume resistivity > 1015Ω.cm, dielectric strength of 90kV/mm and dielectric constant of 2.3; 10. The surface has no adsorption force, no adhesion to any material, and low water absorption (< 0.01%); 1. Good resistance to high-energy radiation; 12, non-toxic, tasteless, no exudate; 13. Excellent anti-aging performance. Under natural sunlight, the aging life of UHMWPE is 50 years; 14. Excellent machinability.