豪沃橡塑高分子量聚螺旋输送机**内衬

  山东豪沃橡塑高分子量聚螺旋输送机**内衬，UHMWPE内衬

  衬板是用来保护筒体，使筒体免受研磨体和物料直接冲击和磨擦，同时也可利用不同形式的衬板来调整研磨体的运动状态，以增强研磨体对物料的粉碎作用，有助于提高磨机的粉磨效率，增加产量，降低金属消耗。

1、高性，摩擦系数低，表面光滑无粗糙，防止物料流动受阻；
2、不吸水性，不受物料湿度的影响，也不会因为吸水而造成物料结痂成块；
3、自润滑性，让粘结性大、不易自由流动的散装物料能够顺畅流动；

4、损性，保护设备，不受物料腐蚀引起设备故障；

5、重量轻，仅是钢材重量的七分之一，易于操作和运输；

6、环保材质，具有生理惰性和生理适应性，可回收再利用；

7、耐化学腐蚀性能，能耐一定浓度下的酸碱盐等的腐蚀，化学性能稳定。

山东豪沃橡塑有限公司位于山东省德州市宁津县，处于京津、济南、石家庄等城市构成的三角地带，位置、环境雅、交通情况便利，公司主要产品：**高分子量聚板（整板及切割板）棒，高密度挤出板（棒）、冰球场围栏、支腿垫板、含硼聚板、工程塑料合金及各种加工件；

  Shandong Haowo Rubber & Plastic High Molecular Weight Polyethylene Screw Conveyor Special Wear-resistant Lining, UHMWPE Lining Lining plates are used to protect the cylinder from the direct impact and friction of grinding bodies and materials. At the same time, different forms of lining plates can be used to adjust the movement state of grinding bodies, so as to enhance the grinding effect of grinding bodies on materials, which is helpful to improve the grinding efficiency of the mill, increase the output and reduce the metal consumption. The liner of screw conveyor is made of ultra-high molecular weight polyethylene, which is a kind of thermoplastic engineering plastic with excellent performance. This material has excellent properties such as wear resistance, high temperature resistance, low temperature resistance, impact resistance, chemical corrosion resistance, self-lubrication, light weight, energy absorption, aging resistance, flame retardant and antistatic. It also has high rigidity and toughness and excellent mechanical strength. It has good electrical insulation and long service life. 

1, high wear resistance, low friction coefficient, smooth surface without roughness, preventing material flow from being blocked; 

2. Non-absorbent, which is not affected by the humidity of materials, and will not cause scabs and lumps of materials due to water absorption;

3. Self-lubricating property, so that bulk materials with high cohesiveness and difficult free flow can flow smoothly; 

4. Wear resistance, protecting equipment from equipment failure caused by material corrosion; 

5. Light weight, only one seventh of the weight of steel, easy to operate and transport; 

6. Environmentally-friendly materials, with physiological inertia and adaptability, can be recycled; 

7. Chemical corrosion resistance, resistance to the corrosion of acid, alkali and salt at a certain concentration, and stable chemical performance.