**高分子量聚送料槽及漏斗内衬 螺旋输送机衬板

  **高分子量聚送料槽及漏斗内衬 螺旋输送机衬板

  螺旋输送机衬板采用**高分子量聚材质加工生产，是一种性能优异的热塑型工程塑料，此材质具有损、耐高温、耐低温、耐冲击、耐化学腐蚀、自身润滑、重量轻、吸能、耐老化、阻燃、抗静电等优良性能。还有很高的刚性和韧性，机械强度非常好。有着电气绝缘性好和**长的使用寿命。

  螺旋输送机衬板特点：

1、高性，摩擦系数低，表面光滑无粗糙，防止物料流动受阻；
2、不吸水性，不受物料湿度的影响，也不会因为吸水而造成物料结痂成块；
3、自润滑性，让粘结性大、不易自由流动的散装物料能够顺畅流动；
4、损性，保护设备，不受物料腐蚀引起设备故障；
5、重量轻，仅是钢材重量的七分之一，易于操作和运输；
6、环保材质，具有生理惰性和生理适应性，可回收再利用；
7、耐化学腐蚀性能，能耐一定浓度下的酸碱盐等的腐蚀，化学性能稳定。

UHMWPE feed chute and hopper lining screw conveyor lining plate
The lining plate of screw conveyor is processed and produced with ultra-high molecular weight polyethylene, which is a kind of thermoplastic engineering plastic with excellent performance. This material has excellent properties such as wear resistance, high temperature resistance, low temperature resistance, impact resistance, chemical corrosion resistance, self lubrication, light weight, energy absorption, aging resistance, flame retardancy, antistatic, etc. There is also high rigidity and toughness, and the mechanical strength is very good. It has good electrical insulation and long service life.

Characteristics of lining plate of screw conveyor:
1. High wear resistance, low friction coefficient, smooth surface without roughness, preventing material flow from being blocked;
2. It does not absorb water, is not affected by the humidity of the material, and will not cause scabs and lumps of the material due to water absorption;
3. Self lubricating, so that the bulk materials with high adhesion and not easy to flow freely can flow smoothly;
4. Wear resistance, protect equipment from material corrosion and equipment failure;
5. Light weight, only one seventh of the weight of steel, easy to operate and transport;

6. Environmental friendly materials, with physiological inertia and physiological adaptability, can be recycled;
7. Chemical corrosion resistance, able to resist the corrosion of acid, alkali and salt at a certain concentration, and the chemical performance is stable.